Payment & Shipping Terms:
|Release:||By Hammer Blow|
construction formwork accessories,
concrete wall form accessories
Cast Iron Cam Clamp 43x105mm for Locking and Securing Formwork
Cast iron Cam clamps are very simple to use.
Step 1: After setting up the wooden or steel formwork, pass tie rods through the walls to the formwork at intervals.
Steop 2: A cam clamp is attached to one end of the rod and fixed with a light hammer blow on the head of the wedge.
Step 3: Another cam clamp is applied to the other end of the rod and locked in position like the first, after the rod has been tensioned using the appropriate rapid tensioner.
Step 4: When the operation is completed, the tensioner is removed and the process is continued with the next pair of clamps.
Dismantling the formwork is quicker than ever.
Simply hit the bottom of the clamp wedge with a hammer, the cam clamp is immediately released and is ready for use over and over again.
|Bar Ø (mm)||Plate size (mm)||Weight (Kg)|
|4-10||43 x 105||0.44|
Contact Person: Mr zhang