HORIZON FORMWORK CO., LTD.
Professional manufacturer of formwork and scaffolding systems
Sales & Support:
|
Product Details:
Payment & Shipping Terms:
|
| Material: | Pressed Steel Plate | OEM: | Available |
|---|---|---|---|
| Finishing: | Natrual Colour, Galvanized | Size: | 120 X 120 X 6mm, 120 X 120 X 8mm, |
| Application: | To Fix Formwork | Weight: | 0.65kg, 0.88kg, As Per Request |
| Samples: | Available | Tech. Process: | Pressed |
| High Light: | shuttering tie rod,tie rod scaffolding |
||
Pressed Waling Plate 120 x 120 x 8mm for Formwork Tie Rod System
The pressed waling plate is a completion to the wing nut without flange. For panel formwork with steel profiles and timber wall formwork, the square plate 120 x 120 and the rectangle plate 100 x140 mm are suitable.
Waling plate is used for timber or steel walings in conjunction with a wing nut or a hex nut for load transfer. The embossing of the plate increases its rigidity.
Load capacity depends on the contact area, the admissible bearing pressure and the thread bar that is used.
| Waler plate | Bar Ø (mm) | Plate (mm) | Hole Ø (mm) | Weight (Kg) |
 |
15 | 120 x 120 x 6 | 19 | 0.65 |
| 15 | 120 x 120 x 8 | 19 | 0.90 | |
| 15 | 120 x 120 x 10 | 19 | 1.10 | |
| 20 | 140 x 100 x 10 | 19 | 1.15 |
| Part Name | Specification | Weight (kg) | Remark |
|
Tie-rod
|
D15 D20 |
1.5 kg/m 2.7 kg/m |
L=6m; Special length available upon request. |
|
Super plate
|
D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
|
3-lug wing nut
|
D15 D20 |
0.97 0.78 |
For tie-rod D15; For tie-rod D20 |
|
Waling plate
|
120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 |
0.65 0.85 |
For tie-rod and nut D15; galvanized |
|
Water stopper
|
D15 D20 |
0.55 0.72 |
Used in water resistant wall; With tie-rod D15 / D20 |
|
Anchor plate
|
D20 | 0.95 | Embedded in concrete as lost part |
Contact Person: Mr. H. Chang
Tel: +86 319 3188757
Fax: 86-319-3156299
