Concrete Wall Forms Horizontal Push-Pull Prop Steel Pipe Q235 Galvanized Finishing

Horizontal Push-Pull Prop to Support Wall Formwork During Erection
 
Push-pull props are to align and prop formwork panels, used with foot plate and connecting parts.
High push-pull load capacity
Standard connection with the wing nut and tie rod, no additional parts needed.
Flexible, but same connection to the steel waling on all HORIZON wall formwork panels.
With right-hand and left-hand turning spindle and revolving handle, it’s easy and safe for aligning
and propping of wall formwork panels.
Push-pull props are also use for horizontal support of formwork panels.
Advantages:
1. Wide range of height adjustment.
2. Customized sizes are available for special applications.
3. Left hand & right hand shoulder nuts are equipped for easily adjusting length.
4. Very simple connection to steel walings and fixing on ground.
Wall Formwork Components:

Components	Diagram / photo	Specification / description
Wall formwork panel		For all vertical formworks
H20 Timber beam		Water proof treated Height: 200mm Width: 80mm Length: as per table size
Steel waling		Painted, powder coated [12 steel channel
Flange clamp		Galvanized To connect steel waling and H20 beams
Panel strut		Painted help formwork panel erection
Waling connector 80		Painted Used for formwork panels alignment
Corner connector 60x60		Painted Used for forming inner corner formwork with wedge pins
Top scaffold bracket		Painted, severs as safety working platform