Payment & Shipping Terms:
|Material:||Q235, Steel Pipe||OEM:||Available|
|Finishing:||Electric Galvanized, Hdg||Standard:||EN1065|
|Size:||From 1.7m To 5.5m||Application:||For Supporting Slab Shuttering|
|Tube Size:||Diameter 56mm, 48mm||Load Capacity:||20KN|
adjustable steel props,
adjustable telescopic steel props
Scaffolding Steel Props With Adjusting Nut and Sleeve of Cast Iron
Scaffolding steel props are used to support slab shutterings in buildings construction, with working height range from 1.7m up to 5,50 m.
The inner tube is Ø 48.3 mm (thickness from 2 mm to 4.0mm) with holes to adjust the working height with help of the lock pin.
The outer tube is Ø57 mm (thickness from 1.6 mm to 2.5mm) with reinforcement at foot.
The pin diameter is between 12 and 14 mm, with a special design that does not allow its fall.
Two end plates, upper and lower plates, serve to give stability to the steel prop.
The thread is covered by a cast iron cup-type nut that has 2 side handles for easy handling.
A steel ring plate is also equipped on the nut that prevents concrete materials falling into the nut and get stuck.
The adjusting nut is made from cast iron, with high strength loading capacity.
Outer tube (mm)
Inner tube (mm)
|1.7m-3.0m||60 / 57 / 48||48 / 40||1.6-4.0||Ext. thread / Int. thread|
|2.0m-3.6m||60 / 57 / 48||48 / 40||1.6-4.0||Ext. thread / Int. thread|
|2.2m-4.0m||60 / 57 / 48||48 / 40||1.6-4.0||Ext. thread / Int. thread|
|2.5m-4.5m||60 / 57 / 48||48 / 40||1.6-4.0||Ext. thread / Int. thread|
|3.0m-5.5m||60 / 57 / 48||48 / 40||1.6-4.0||Ext. thread / Int. thread|
Contact Person: Mr zhang