Payment & Shipping Terms:
|Material:||Q235 Steel Channel||OEM:||Available|
|Finishing:||Painted, Powder Coated, Or As Per Request||Application:||For Retaining Wall Formwork|
|Height:||Up To 3.3m||Shifting:||By Crane|
one sided wall formwork,
one sided concrete formwork
Bracing Support Single-sided Formwork with Easy Handling and Lower Cost
Bracing support single-sided formwork is also used for single-side structural walls construction. With simple structure, less weight and components, it is the ideal solution for walls less than 3.3 m high.
The push-pull braces are used to align and support the formwork. The loads resulting from the pouring are transferred into the push-pull brace and the cast-in tie anchors at the front base of the vertical waling.
1. The concrete pressure are reliably transferred to the embedded anchor systems and push-pull braces.
2. The maximum wall height is up to 3.3 m.
3. Once assembled, each set of bracket and panels can be easily lifted and moved to the required pouring location.
4. For safety, working platforms can be fixed into these systems
|Components||Diagram / photo||Specification / description|
|Vertical waling||[12 steel channel|
|Push-pull brace||To support formwork|
The cross beams are fastened to the frames by means of screw tie rods connected to the anchor system which are pre-casted in the concrete ground.
Also, cross beam links single-sided frames in horizontal position to form a unit for lifting.
|Anchor rod D20||
Cast in concrete and discharges the tensile loads into the building structure.
With Dywidag thread, to transfer the load from the supporting frames into the floor slab or foundation.
|Coupling nut D20||With hexagonal head, to connect cast-in anchor rod and re-usable anchor elements.|
|Top scaffold bracket||
severs as safety working platform
Contact Person: Mr zhang